Shop by Category

Shop by Brand

Air Chambers

The AirChamber is the original rigid storage chamber, proven over the last 20+ years and the choice of countless professional storage companies. It features thicker clear PVC and base than other systems, strong but thin metal poles and reliable fans. We carry a full range of spares should you ever need them.

Technical Features

  • High quality lightweight PVC material is UV protective, anti-static, flame resistant and withstands temperatures as low as -25ºC
  • High-tech static trap filtration system removes all abrasive particulate matter from the atmosphere ensuring your vehicle/items remain in pristine condition
  • Once only assembly, fully portable when erected
  • Easy access and removal of vehicle/items when deflated - just unzip an end flap and drive out
  • Full height zipped doors on both sides to allow access to your car doors. These are 1m wide. Door position is centred at the half way point on the AirChamber. The poles are an additional 10cm wider than the zips (each), to give even more flexibility on where you park your car.
  • 12v brushless fan motors, for maximum longevity and efficiency
  • Base sheet is a highly durable nylon-plastic weave which is fuel, oil and brake fluid repellent. This tough construction makes it possible for minor maintenance tasks to be carried out.
  • Eliminates rapid changes in air temperature, preventing condensation with a virtually moisture free environment, eliminating damp and mould
  • You can run in a battery conditioner or dehumidifier too via holes pre-prepared in the Air Chamber shell. With a dehumidifier, don't run the AirChambers fans.
  • Power usage - 7w, each motor is 0.26 amps - annual running costs less than £15. You can run this off a car/leisure battery as the AirChamber only uses 6 amps a day. So a week's use will need a 45aH battery, 90aH will keep it going for 2 weeks. We suggest having a 2nd battery to take away and swap, fully charged, if your garage doesn't have mains power. You can also use a Solar Panel via an Inverter to maintain/charge a car battery at your non-mains garage.

  • If you have space or size issues, note that the poles can be cut down and refitted into the joints to allow for 'up and over' garage doors, or for slightly too short garages with benches etc in the way. Just trim off what you don't need, and either leave the outer part of the chamber to swell as the fans engage and build up pressure inside, or gaffer tape it down. We can supply replacement full length poles for when you move home or wish to sell your unit, or in case you cut too much off.... Many customers cut off as much as 1-2 feet off the end if the garage door interferes a lot.

    Note that the Chamber swells by about 10cm in every direction when inflated and you can use one in a tight garage, just allow an extra 20-30cm at the far end to allow the fan to work unobstructed.

Compare Selected