More Than Polish - for special cars
Telephone for advice 01780 749449   view basketYour Basket Total:

Established in 2003, driven by advice for owners of classic, modern, modest and supercars. Phone us for our recommendations

 
Zymol
Race Glaze
- All Products
- Signature series Black Label
- Signature series Paste Waxes
- Signature Pre-Wax Cleansers
- Signature Wood Wax
Long Life Water Filter System
Polishing Machines & Compounds
Hindsight
Renovo
Kenotek Valeting Products
Valentines Wax
Meguiars
P21S
Sonax
Porsche Car Care
Gloss It
Rollout Covers
Dodo Juice
Smartwax
Gliptone
Snow Foam Lance Kit
UK-wide Valeting Service
 
 
Rollout Car Cover - NEW
Protector-4 Car Covers
Stretch Car Covers
Soft Indoor Car Covers
Breathable Car Covers
Breathable & Waterproof Covers
Custom Car Covers - Indoor
Custom Waterproof Covers
Custom Peach Indoor Covers
Hearse/Limo Car Covers
Motorhome (RV) Covers
Porsche Car Covers
Ferrari Car Covers
Aston Martin Car Covers
Touchless Car Cover
Reveal Car Covers
Waterproof Car Half Covers
Budget Car Covers
Caravan Covers
Garage Floor Tiles
Snow Tyre Socks
 
 
Air Chambers
Dehumidifiers
Battery Conditioners
Door Protector Pads
Non-slip Wing Cover
Logo`d Seat Covers
Custom Made Mats
Tyre Trainer
Hardtop Stands & Covers
 
 
Cars For Sale
Car Inspections
Detailing Basics
Fine Luxury Goods
Custom Luggage
Official Ferrari Calendar 2015
Official Martini Racing Clothing
Battery Conditioners CTEK and AccuMate
Convertible Wind Deflectors
Cymbal Doctor
Classic Car Insurance
 
 
Payment

Battery Conditioners  - CTEK and AccuMate

                    6V & 12V units

CTEK

Overview:

CTEK - the manufacturer of choice for major car manufacturers like Mercedes, Porsche, Aston Martin, Bentley and Ferrari. Why pay a huge premium for their logo on a battery conditioner when you can buy the same unit from us?

CTEKUses include classic cars, especially BMW, Porsche, MGB, VW & American Cars with 6V batteries, modern sports cars, off-road cars, race cars & bikes, tractors, lawn & garden equipment, emergency service vehicles – basically anything which requires a fully charged lead-acid battery needs a conditioner!

These units are designed to be left on the vehicle, keeping the battery fully charged for immediate use and attach with either crocodile clips or a pair of eyelets (both supplied) direct to the battery or optional cigar lighter to a permanently live 12v feed.

 

CTEK XT4000 Battery Charger

The CTEK MULTI XT4000 is a 24V fully-automatic switch mode battery charger and conditioner. It is cost effective, reliable and ideal for use on wheelchairs, school buses, trucks/HGVs, boats and back-up systems. For charging batteries up to 100aH, maintainance charging on larger units.

Contains: 1 X 24 Volt Battery Charger, 1 x Clamp Connection, 1 x Comfort Connector, 1 x User Manual

Image result for ctek xt4000

Offer price: £169.00 Add to basket

2 units only

CTEK Units

CTEK XC 800:

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries.
The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification.
If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging.
You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger.

  • Three step, fully automatic switch mode model.
  • Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah, 1.2-100Ah maintenance charging.
  • Maintenance pulse charging increases battery life and gives superb performance.
  • Charges even drained batteries.
  • Pulse recover of slightly sulphated batteries.
  • Low back current drain, low ripple and input voltage independent (170-260V).
  • High efficiency: 85%.
  • Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals.
  • The charger can be connected for months, ideal for seasonal vehicles.
  • Compact design with mounting holes for permanent assembly.
  • Easy Wall mounting, easily fitted in place using two screws. The diameter of the mounting holes is 4.2mm.
  • 2 year warranty.
  • £44.95 OUT OF STOCK
  • Add to basket

 

Cigar adapter for easy access, needs permanent live £9.99 Add to basket
Eyelets - attach to termianls and leave under bonnet for fast hook-up £4.99 Add to basket

NEW - CTEK Bumper - highly grippy silicone rubber protective case for all CTEK units up to the 5.0 to prevent slippage off your car and damage by impact.   Price: £9.99 Add to basket

Product image of CTEK Battery Charger Protector - Bumper

CTEK MXS14 Battery ConditionerCTEK Battery Conditioner
The MXT 14 is a professional 24V battery charger. It is developed for commercial vehicles where vehicle batteries are put under considerable strain and is therefore ideal for bus, truck and commercial vehicle workshops.
The CTEK MXS 14 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions in unheated workshops. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations on on-board computer systems.

The MXT 14 is a fully automatic 8-step charger that delivers 14A to 24V batteries from 28-300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.

It also has a supply capability so is ideal for temporary maintenance of vehicle settings when the battery is disconnected e.g. for remapping. It is supplied with clamps and a temperature sensor on the cable.
Details:

  • Volts: 24V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 28.8V, RECOND: 31.6V, SUPPLY: 27.2V
  • Minimum battery voltage: 2.0V
  • Charging current: 14A max
  • Current, mains 2.9A rms (at full charging current)
  • Back current drain: <1Ah/month
  • Ripple: <4%
  • Ambient temperature usage: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 28-300Ah up to 500Ah for maintenance
  • Dimensions: 235 x 130 x 65mm (L x W x H), weight 1.9kg
  • Insulation class: IP44
  • Price: 249.99
  • [Add To Basket] OUT OF STOCK

 

CTEK MXS10 Battery ConditionerCTEK Battery Conditioner

The CTEK MXS 10 is a battery charger that offers state of the art technology. It is ideal for professional use and excellent in workshops, caravans, RVs, boats or cars. The MXS 10 is perfect for solving a broad range of battery problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process.

The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20-200Ah and is suitable for maintenance charging up to 300Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.

Technical Summary:CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries
  • Step 7: Fully charged battery
  • Step 8: Maintenance charging
  • Temperature sensor
  • COLD/AGM: Charging in cold conditions and AGM batteries
  • RECOND: Recondition of deeply discharged batteries
  • SUPPLY: Use the charger as a power supply

Technical Specification:

  • Model number: 1046
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V
  • Min battery voltage: 2.0V
  • Charging current: 10A max
  • Current, mains: 1.0A rms (at full charging current)
  • Back current drain: <1Ah/month
  • Ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 20-200Ah, up to 300Ah for maintenance
  • Dimensions: 197 x 93 x 49mm (L x W x H), weight: 0.8kg
  • Insulation class: IP65
  • Price: £137.95 OUT OF STOCK
  • [Add To Basket]

 

CTEK MXS 7.0 Battery ConditionerCTEK Battery Conditioner

The MXS 7.0 is the perfect universal 12V charger. It is ideal for charging larger batteries such as caravan, RV, boat and car batteries. These types of vehicles often demand features that can solve a broad range of battery-related problems. The MXS 7.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations.

The MXS 7.0 is a fully automatic 8-step charger that delivers 7A to 12V batteries from 14-150Ah and is suitable for maintenance charging up to 225Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty.

Technical Summary:CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries, for fully charged battery / maintenance charging
  • COLD/AGM: Charging in cold conditions and AGM batteries
  • RECOND: Recondition of deeply discharged batteries
  • SUPPLY: Use the charger as a power supply

Technical Specification:

  • Model number: 1053
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V
  • Min battery voltage: 2.0V
  • Charging current: 7A max, current, mains: 1.2A rms (at full charging current)
  • Back current drain: <1Ah/month
  • Ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 14-150Ah up to 225Ah for maintenance
  • Dimensions: 191 x 89 x 48mm (L x W x H), weight: 0.8kg
  • Insulation class: IP65
  • Price: £108.95
  • [Add To Basket]

 

CTEK MXS 5.0 Battery Conditioner NEW 2013 model CTEK Battery Conditioner

The MXS 5.0 is a charger that offers state of the art technology that was previously only found in CTEKs professional product range. The charger can solve a broad range of battery-related problems and is the perfect charger for those with high demands. The MXS 5.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process.

The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1,2-110Ah and is suitable for maintenance charging up to 160Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty.

This our recommended unit for larger (V8/V12) sportscar batteries or big diesel 4x4s with batteries over 75aH, and where faster charging may be required.

  • Auto: Fully automatic for optimal charging CTEK Battery Conditioner
    12V: For all lead-acid batteries
    Step 7 indicates fully charged battery, moving to step 8 for maintenance charging
    COLD/AGM: Charging in cold conditions and AGM batteries
    RECOND: Recondition of deeply discharged batteries

Technical Specification:

  • Model number: 1049
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V
  • Min battery voltage: 2.0V
  • Charging current: 5A max, current, mains: 0.65A rms (at full charging current)
  • Back current drain: <1Ah/month, ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 1.2-110Ah up to 160Ah for maintenance
  • Dimensions: 168 x 65 x 38mm (L x W x H),weight: 0.6kg
  • Insulation class: IP65
  • Price: £79.95
  • [Add To Basket]

 

CTEK MXS 3.8 Battery ConditionerCTEK Battery Conditioner

The CTEK MXS 3.8 is a proven and reliable charger. It is the successor to the hugely successful XS3600, itself replaced by the MXS3.6, which consistently won awards and is our recommend charger/conditioner for batteries up to 120aH – for sports and executive cars with 3 litre plus engines which typically have batteries of 65aH+. It is the same unit that CTEK produce for Ferrari, Porsche, Aston Martin, Mercedes and Bentley – but without their sticker which typically doubles price !

It offers important features such as desulphation, maintenance charging and cold mode for optimised charging during cold winter days.
It is also suitable for charging demanding AGM batteries (i.e. Optima). It is the ideal charger for those looking for quality and simple ‘connect and forget’ charging.
The MXS 3.8 is a fully automatic 7-step charger that charges 12V batteries from 7-75 Ah and is suitable for maintenance charging up to 120Ah.
The MXS 3.8 is IP 65 classified (splash and dust proof) and delivers selectable 0.8A or 3.6A.
It is designed to protect vehicle electronics and is non-sparking-, reverse polarity protected and short-circuit proof.
The MXS 3.6 is delivered with a 5-year warranty.CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries
  • Fully Charged Battery / Maintenance Charging
  • COLD/AGM: Charging in cold conditions and AGM batteries
  • Volts: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V
  • Minimum battery voltage: 2.0V
  • Charging current: 3.6A max
  • Current: mains 0.65A rms (at full charging current)
  • Back current drain: <1Ah/month, ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 4-step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 7-75Ah up to 120Ah for maintenance
  • Dimensions:165 x 61 x 38mm (L x W x H), weight: 0.5kg
  • Insulation class: IP65
  • Price: £64.95
  • [Add To Basket]

 

CTEK MXS25 Heavy Duty Battery ConditionerCTEK Battery Conditioner

Powerful and efficient charging for work and leisure.

The MXS 25 is a professional 12V charger. It offers efficient and fast charging and is ideal in workshops, caravans, RVs and boats. The MXS 25 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations.

The MXS 25 is a fully automatic 8-step charger that delivers 25A to 12V batteries from 40-500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries
  • Fully Charged Battery / Maintenance Charging
    Temperature sensor
  • RECOND: Recondition of deeply discharged batteries
  • SUPPLY: Use the charger as a power supply
  • Model number: 1055
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 14.4V, RECOND: 15.8V, SUPPLY: 13.6V
  • Min battery voltage: 2.0V
  • Charging current: 25A max
  • Current, mains: 2.9A rms (at full charging current)
  • Back current drain: <1Ah/month, ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 40-300Ah up to 500Ah for maintenance
  • Dimensions: 235 x 130 x 65mm (L x W x H),weight: 1.9kg
  • Insulation class: IP44
  • Price: £219.99
  • [Add To Basket]

There is also the MXS 2500 Extended with a 6 metre cable, based on the previous unit (very similar performance) at an extra £80.

 

Accumate

Select a tab for more info...
Note: TM73 Extension is suitable for pre-2015 Accumate and pre-2012 Optimate units only.

  • Accumate
  • Features
  • Additional Info

AccumateAccuMate - 6V & 12V battery optimiser - ideal for classic cars, motorcycles and many other uses.

ACC

Uses include classic cars, especially MGB, VW & American Cars with 6V batteries, modern sports cars, off-road cars, race cars & bikes, tractors, lawn & garden equipment, emergency service vehicles – basically anything which requires a fully charged lead-acid battery needs AccuMate!

The 6V / 12V selectable smart charger.

AccuMate is the sister product to the well established OptiMate motorcycle battery charger/optimiser, which has a proven reputation with over 1,000,000 OptiMates sold to date. Like OptiMate, AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. AccuMate is suitable for all 6V and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of vehicles which are not used on a daily basis like classic and sports cars.

Operation of AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when AccuMate has detected that the battery is properly charged will it switch to the final stage for correct long-term battery maintenance and indicate a green LED. If at any time AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage.

Do not be fooled by other similar compact chargers of the same price range, which do not have the complex circuitry to safely charge batteries over long term periods.

AccuMate 6-12V - 4 step charger & maintainer for 6V and 12V batteries.

Features:

  • Versatile, 4-step, automatic charger and maintainer for all modern and classic 6 & 12V lead-acid batteries up to 75Ah.
  • Perfect for all types of rechargeable lead-acid batteries: filler cap types; absorbed acid "MF" for motorcycles; valve regulated (VRLA); & GEL-electrolyte types.
  • Very easy to use - Select 6V or 12V charging output according to battery type and then connect to battery and mains power. The rest is fully automatic.
  • Comprehensive & intelligent LED indications - AC power on; battery voltage selection; wrong polarity connection; charging; and maintain (charge completed).
  • The green maintain (charge completed) LED means exactly that, charging has been completed.
  • No risk of overcharging – designed for long-term connection. AccuMate`s special monitoring circuits vary & regulate the current & voltage exactly according to the battery manufacturer’s specifications.
  • SAFE & foolproof - No worries about wrong connections, accidentally shorting the battery clamps or blowing fuses. Automatic protection even suppresses sparks.
  • Compact, yet powerful - Will safely charge 12V batteries discharged to as low as 3V (1.5V for 6V batteries) when other chargers are unable to. Charging time equal to a 3 Amp conventional charger despite the compact size.
  • No risk of overheating - Automatic temperature control regulates charge current to a safe level in hot or enclosed conditions.

Delivered with two interchangeable connection sets, one with clamps for bench charging, the other with in-line protection fuse and eyelet terminals for permanent connection to the vehicle’s battery to allow easy reconnection of charger when necessary.

Optional accessories include a wall bracket, additional fused permanent connection leads, cigarette lighter plug lead (also fits DIN 12V socket as found on some BMW, Honda & Triumph touring motorcycles) and a 2.5m output extension lead.

CE Certification; 2-year warranty.

AccuMate – additional information.

Accumate

AccuMate charges batteries much quicker than conventional Constant Voltage battery chargers due to its Constant Current mode. AccuMate is also much safer as both Voltage & Current are monitored and regulated.

AccuMate’s advanced 4-step charging program:

(6V values in brackets)

STEP1: Boost – Constant current charging of 1.2A up to 14.3V (7.15V) - Yellow CHARGE LED on

STEP2: Absorption - Voltage held at 14.3V (7.1V) until current drops below 200mA - Yellow CHARGE LED on

STEP3: Maintenance - Float voltage held at 13.5V (6.7V) for ideal long-term battery care - Green MAINTAIN LED on

STEP4: Interactive standby - Active only once a battery has reached step 3:

Monitors if current exceeds 200mA or voltage drops below 13.2V and cycles between step 2 and 3 to prevent the battery from losing any charge due to permanently connected devices such as an alarm or parasitic drain caused by aged or faulty vehicle wiring. With interactive standby your battery will always be ready to start your vehicle.

Accumate

6V & 12V battery optimiser - ideal for classic cars, motorcycles and many other uses £39.95 Add to basket
Cigar Lighter Socket Adaptor £12.99 Add to basket

Accessories

Wall Mounting Bracket (Mk 1 version, not window mounted)

£7.99 Add to basket
2.5m Extension Cable - Suitable for pre-2015 Accumate and pre-2012 Optimate units only. £7.99 Add to basket
Fused Eyelet Lead £5.99 Add to basket
Weatherproof Permanent Eyelet Lead TM71 £5.99 Add to basket
Cigar Socket Lead TM72 £12.99 Add to basket

Customer Reviews

FeeFo Feedback
Date Customer Score Customer Comment
Horsepower Racing (UK) - Paul Bailey
++

Reliable product used many times before

Alan
++

Excellent